Skip to content
OffroadTips logo — light bar icon with the OffroadTips wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Light Bars
  • Pod Lights
  • Light Wiring
  • Free Tools
  • UTV Lighting
  • Light Mounts
OffroadTips logo — light bar icon with the OffroadTips wordmark
Free calculator

Spot vs Flood Beam Width Calculator

Enter two beam angles from a spec sheet and compare how wide each beam is at 50, 100, 200 ft or a custom distance.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Geometry only: the tool shows idealized beam width, not brightness, lumens, usable range or what you will see on the ground. Manufacturers may define beam angle differently; the tool uses the angle as entered.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

The difference between spot and flood LED lights is beam angle: a spot has a narrow angle, a flood a wide one. Enter two angles from spec sheets below to see how wide each beam is at 50, 100, 200 ft or any distance you choose.

How to use the spot vs flood beam width calculator

  1. Find the beam angle, in degrees, on the spec sheet of each light you want to compare and type them into Beam A and Beam B.
  2. Or tap one of the example angles (10°, 30°, 60°, 90°). These are illustrations only, not product specs.
  3. Enter a custom distance in feet, from 1 to 2000, if you want a figure beyond the fixed 50, 100 and 200 ft rows.
  4. Press Calculate beam widths. The results show each beam’s width at every distance, a plain-language ratio line, and a top-down diagram of both beams drawn to one shared scale. The Download diagram (SVG) button saves the current diagram as beam-width-diagram.svg.

Angles must be between 1° and 170°. Empty or out-of-range entries show a message instead of a result. The Reset button restores the defaults. Nothing you type is stored or sent anywhere.

In the diagram, Beam A has a solid outline and Beam B a dashed outline, so the two stay distinguishable without relying on colour. Gray lines mark 50, 100 and 200 ft and your custom distance. Both axes use the same scale, so a very wide beam can make a very narrow one almost invisible. When that happens, a dotted line marks the narrow beam’s position and is labelled as a marker, not drawn to scale. The table always gives the true widths.

How beam width is calculated from beam angle

A beam is treated as a cone of light. Seen from above, it is an isosceles triangle with the light at the point. Plane geometry gives the width at any distance:

width = 2 × distance × tan(angle ÷ 2)

This is the standard angular-size relation, rearranged to solve for width. Because distance appears in both beams’ formulas, the ratio between two beams does not depend on distance: Beam B is tan(B ÷ 2) ÷ tan(A ÷ 2) times as wide as Beam A, whether you stand 50 ft or 500 ft away.

Worked examples, in feet:

Beam angleWidth at 50 ftWidth at 100 ftWidth at 200 ft
10°8.7517.5035.00
30°26.7953.59107.18
60°57.74115.47230.94
90°100.00200.00400.00

Comparing the 10° and 60° rows gives a ratio of about 6.60 (115.47 ÷ 17.50) at 100 ft, and the same ratio at 50 ft or 200 ft. Comparing 30° with 90° gives about 3.73.

Spot vs flood LED lights: what the beam angle tells you

Shoppers searching for LED spot lights for trucks, or for the difference between spot and flood LED lights, are usually asking a simple question: how much of the scene does the light cover? Beam angle answers the “how wide” part. A narrower angle concentrates light into a narrower strip. A wider angle spreads it over a wider area. The calculator turns that into feet so you can picture the difference.

It does not tell you how bright a light is or how far it reaches. A wider beam is not automatically better or worse than a narrow one; they simply cover different shapes. For brightness or intensity, look at the figures the manufacturer publishes for that specific light.

This page also does not define which angles count as “spot” or “flood.” Manufacturers may describe beam angle in different ways, so the calculator uses whatever angle you enter, exactly as given on the spec sheet. The 10°, 30°, 60° and 90° buttons are round-number examples for illustration, not typical values for any product type.

Methodology & sources

Every number comes from one formula, width = 2 × distance × tan(angle ÷ 2), with the angle converted from degrees to radians and distance in feet. Results are rounded to two decimals for display only; the calculation and the diagram use unrounded values. The ratio between the two beams is also calculated at full precision and shown to two decimals, or to three significant figures when two decimals would round to zero (for example 0.000764× for a 170° Beam A and a 1° Beam B).

The model is an idealized cone with a hard edge, projected on a flat surface facing the light, with no reflection, falloff or ground-slope effects. Real beams fade gradually at the edges, so the width you see outdoors can differ from the calculated figure.

  • Calculated using standard plane geometry; no third-party data is used and nothing is stored.
  • Formula reference: Wikipedia, “Angular diameter” (δ = 2·arctan(d ÷ 2D), rearranged for width).

Last updated: October 2026

FAQ

What is the difference between spot and flood LED lights?

A spot light has a narrow beam angle, so it concentrates light into a narrow strip. A flood light has a wide beam angle, so it spreads light over a wider area. This calculator shows that difference as beam width at a given distance.

Does a wider beam angle mean a brighter light?

No. This calculator measures geometry only and does not measure brightness. For brightness you need the intensity data on the manufacturer’s spec sheet.

How do I calculate beam width from beam angle?

Use width = 2 × distance × tan(angle ÷ 2). For example, a 60° beam is 115.47 ft wide at 100 ft.

What beam angle counts as a spot or a flood?

This page does not set fixed angle ranges, and manufacturers may define beam angle differently. The calculator uses the angle exactly as you enter it from the spec sheet.

Is the calculated width what I will see on the ground?

Not exactly. The model is an idealized cone with a hard edge on a flat surface facing the light, with no reflection or falloff. Real beams fade gradually at the edges.

Related guides

  • Light Bar Beam Pattern Types: Spot, Flood, Combo, Driving and Wide
  • What Beam Pattern Is Best for Ditch Lights? Flood vs Wide vs Spot
  • How to Choose the Right Beam Pattern for Your Off-Road Lights
  • Fog Lights vs Driving Lights: Beam Shape, Purpose and Legal Use
  • Best LED Cube Lights for UTVs
  • LED Light Bar Maintenance Checklist: Seasonal Care for Longer Life

More free tools

Cordless LED Work Light Runtime Calculator

Estimate how long a cordless LED work light runs on a tool battery from volts, Ah and watts, with a 2, 4, 5 and 9 Ah pack comparison.

LED Light Bar & Whip Light Remote Control App Finder

Filter 24 verified iOS and Android apps that control LED light bars, whip lights, rock lights and underglow by brand, light type and features.

Off-Road Lighting Amp Draw & Wire Gauge Calculator

Find how many amps your LED light bar, pods and rock lights draw on 12 V or 24 V, then check wire gauge and voltage drop for your run.

See all free tools (4) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 OffroadTips | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Light Bars
  • Pod Lights
  • Light Wiring
  • Free Tools
  • UTV Lighting
  • Light Mounts
Search